How to replace the timer in a dryer? (2023)

Remove the control panel and disconnect the connecting wires carefully. At the back of the control panel, you will find the timer connected to its knob on the opposite end. Unscrew to remove the timer and install the replacement timer. Finally, put the dryer back together and hook up unassembled parts so you can run a test cycle.

Key Takeaways

  • The timer on a clothes dryer is there to help regulate the drying cycle. It ensures that your clothes don’t get damaged by over-drying.
  • Timers are located behind the control panel of the dryer and have a knob or dial that can be turned to set the drying time.
  • Replacing a timer can be done at home with the help of basic hardware tools including the replacement part.
  • Check the user manual to locate the timer before starting the replacement process and to ensure you are using the correct replacement part.
  • Be careful when disconnecting the wires from the old timer as there may be more than one wire attached to each terminal. It’s best to mark the wires before disconnecting them so you can correctly connect the new timer.
  • Check if the dryer is still under warranty before attempting any repairs. Some manufacturers may void the warranty if repairs are attempted by non-qualified personnel.

Table Of Content

  • What is a timer in a clothes dryer?
  • Why is a timer in a clothes dryer important?
  • How to replace the timer in a dryer?
  • Final Thoughts
  • Frequently Asked Questions

What is a timer in a clothes dryer?

A timer in a clothes dryer is a device that controls the amount of time that the dryer runs and is usually located on the control panel.

It works by regulating the flow of electricity to the dryer’s motor and heating element at set intervals depending on the selected cycle.

The timer switch is located behind the control panel and has a knob or dial that can be turned to set the drying time.

When the timer is turned to the desired setting, the dryer will run for that amount of time and then shut off automatically.

(Video) Whirlpool Dryer Repair - How to Replace the Timer

Why is a timer in a clothes dryer important?

A clothes dryer timer is important because it helps to control the amount of time the dryer runs.

By regulating the amount of time it runs, the timer can help to prevent the over-drying of clothes, save electricity, and extend the life of the dryer.

So, a timer works in conjunction with the dryer’s thermostat to help regulate the ideal temperature for drying clothes.

Furthermore, the timer in a dryer includes a motor that turns electrical contacts on and off in the timer. If this motor is damaged, the dryer may not start.

All of the above factors make the timer an extremely important component of a dryer.

Without a properly functioning timer, the clothes dryer may not operate properly.

How to replace the timer in a dryer?

Replacing a timer in your dryer is an easy task and can be accomplished at home in a quick time by using basic tools.

You will need:

  • A screwdriver
  • A new timer (which can be purchased from a dryer repair kit or online),
  • Wire cutters
  • Needle nose pliers.

Additionally, you can use safety gloves, a dust mask, and eye gear to protect your eyes.

Assuming that you have all of the necessary tools, follow these steps to replace the timer on your clothes dryer.

Step 1: Disconnect the supplies to the dryer

First, disconnect your dryer from its power source.

(Video) GE Dryer Repair – How to replace the Timer

You can do this by unplugging it from the power socket or by shutting off the circuit breaker that provides power to it.

Additionally, disconnect other supplies from the dryer for a smoother process, and then move the dryer away from the back wall.

Step 2: Dismantle the control panel

Next, remove the screws that hold the control panel in place using a screwdriver.

Once the screws are removed, lift up the control panel and set it aside.

In some cases, you may remove the top panel to release the control panel.

Step 3: Locate and remove the timer

Locate the timer on the back of the control panel and disconnect its wiring harness using wire cutters.

Now, remove the old timer by unscrewing it from its mounting bracket using a screwdriver.

Step 4: Install the replacement timer

Install the replacement timer by screwing it into place on the mounting bracket and reconnecting its wiring harness using needle-nose pliers.

Step 5: Reassemble the dryer

Finally, replace the control panel and screw it into its place using a screwdriver.

Next, connect the power cable to the power socket.

Step 6: Run a test cycle

Once you have reconnected all the components, plug the power cable into the socket.

(Video) No Heat!!! Properly Repairing a Dryer Timer for Estate/Whirlpool Dryer

Now, you can test the new timer by running a test dry cycle.

Final Thoughts

It’s important to figure out what’s wrong with your clothes dryer before you try to fix it.

The symptoms of a problematic dryer may be confusing as the same symptoms may show up for different issues.

For instance, if your dryer isn’t starting, the problem could be with the door switch, start switch, thermal fuse, timer, or even the power cord.

As you can see, the symptoms of a problematic timer may be the same as other issues with the dryer.

That’s why it’s important to properly diagnose any issues before attempting repairs.

It may be hard to narrow down the actual cause by just looking at the symptoms.

So, it’s recommended to reach out to a professional for help in diagnosing the problem before attempting any repairs unless you are extremely sure about the problem (in this case, the timer).

Lastly, always check to see if the dryer is still under warranty. Many parts, including the timer, may be covered.

Frequently Asked Questions

What is the cost of a dryer timer?

The cost of a timer will vary depending on the brand and model of the dryer. However, you can expect to pay anywhere between $40 and $150. If you include the labor cost, the total cost will be much higher.

What happens if a timer turns faulty in a dryer?

If the timer becomes faulty in your clothes dryer, it can cause your dryer to overheat or not heat at all. Moreover, this can damage your clothes and potentially start a fire. If you notice that your dryer’s timer isn’t working right, you should get it fixed or replaced right away.

Where is a timer located in a dryer?

A clothes dryer timer is usually located near the control panel of the dryer. It may be a separate knob that you turn to set the time, or it may be built into the control panel.

Do all dryers use the same timer?

The type and size of the timer used in a dryer will depend on the brand and model.

How do I know if my dryer timer is broken?

Typically, a broken timer will not allow the timer to advance, and you may have to manually move through the cycle. Additionally, the dryer may not heat up or may overheat. If you notice these issues, it’s best to reach out to a professional for help.

(Video) Whirlpool, Roper, Kenmore Dryer -Timer not working -Diagnostic & Repair

(Video) Whirlpool Dryer Repair - How to Replace the Timer

You May Also Like

  • How to Replace Gas Valve in a Gas Dryer?
  • How to replace the flame sensor in a dryer?
  • How to replace the moisture sensors in a dryer?
  • How to replace the drive belt in a dryer?
  • How to replace the Thermostat in a Dryer? (In-depth guide)
  • How to replace a thermal fuse on a dryer?
  • How To Replace a Dryer Blower Wheel?
  • 11 Creative Ideas to Recycle Washer and Dryer Drums
  • Can you use a Dryer Drum for a Fire pit?
  • How To Replace Dryer Heating Element? (Step-by-Step)
  • How to replace the Igniter in a Gas Dryer?
  • What is a Smart Washer and Dryer? (Explained)
  • Washer Dryer: 27 Questions Answered
  • Why do Korean Homes come with Washers but not Dryers?
  • Gas Dryers vs Electric Dryers (Differences Explained)
  • Damaged Dryer Vents: 8 signs your dryer vent is damaged
  • Why is the dryer not drying clothes?

FAQs

How do you fix a dryer timer that won't advance? ›

Unplug the dryer and use a multi-meter to check for continuity in the contacts that control the small timer motor. If a continuity test fails, replace the timer motor, or the complete timer itself.

What causes dryer timer failure? ›

The timer contacts control the dryer motor as well as the heat circuit and the timer motor itself. A defective timer motor or a defect in the timer's electrical contacts can cause the timer motor to fail and the timer will need to be replaced.

How much does it cost to replace a dryer timer? ›

Dryer Timer Replacement Cost

Replacing a dryer timer motor costs between $150 and $300. The dryer timer motor tracks the time of your drying cycles and turns the dryer off when the correct time elapses.

How do I know if my dryer timer is broken? ›

Broken timer motor

When your dryer functions properly, the timer moves through the settings as heat inside the tumbler reaches a certain level. If you notice the dryer timer not advancing, or if you have to manually move it through its cycle, the timer motor may be the problem.

Why does my dryer keep stopping after a few minutes? ›

The most common cause of a dryer shutting off after a few minutes is a broken or faulty drive belt. The drive belt goes around the dryer drum, idler pulley, and the motor pulley and helps the dryer to rotate when operating. If it is defective, the dryer won't work correctly.

Why does my dryer run for a few minutes then shuts off? ›

The first and main, reason a dryer shuts off after a few minutes is an overheating dryer motor. When this occurs, you might need to replace it – especially if you can hear a loud, buzzing noise emanating from the motor.

Will dryer timer cause dryer not start? ›

Since the timer contacts are what control the dryer's motor and its heater, a broken timer could be the cause if the dryer won't start at all.

Are all dryer thermostats the same? ›

Dryers contain two different types of thermostats: the operating thermostat (sometimes called the cycling thermostat) and the high-limit thermostat. The only difference between these two thermostats is their opening and closing temperatures. Thermostats are vital to the proper functioning of clothes dryers.

Is it cheaper to repair or replace a dryer? ›

For example, if the appliance is still below the life expectancy given by the manufacturer, it may be worth repairing. Use the 50% rule: If the cost of repairing your dryer exceeds 50% of the cost of a new dryer, you're better off buying a new one. Installing a new dryer costs between $300 and $2,000.

Is it worth fixing a dryer that is 10 years old? ›

It's recommended as a rule of thumb that if your dryer is close to 10 years old, you're better off replacing it outright, especially if the quote for repairs comes in high.

How many years should a dryer last? ›

A dryer should last 10-13 years. To extend the dryer's life, clean the lint trap after each use and make sure the outer vent is clear as well.

What does it mean when your dryer clicks but wont start? ›

If your dryer will not start and instead makes a clicking noise, it is most likely due to a fault with the door switch, start switch, or thermal fuse. A broken dryer belt is the next most likely cause of the issue.

How do I reset my dryer? ›

Reset your dryer

Resetting your dryer is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the dryer (usually 1 to 5 minutes at most), and then power it up again. That's it.

Why does my dryer stop every 10 minutes? ›

As your dryer motor ages, wear and tear can cause it to get hotter during a cycle. Sometimes, all that extra heat can activate the thermal overload switch, which prevents a potential fire hazard and shuts off the machine. The motor may restart a few minutes later, once it's cooled down, but the problem won't disappear.

When I start my dryer it it heats OK but then in a few minutes the heat turns off and my clothes are not dry what could be the issue? ›

Check the Air Vent and Duct

Clogged air vents are a common cause for poor airflow in clothes dryer systems. One way to see if your dryer's air vent is clogged is by turning on your dryer and going outside to feel the flow of air leaving the vent. If it's slow and not very warm, your vent may be due for a good cleaning.

Why won't my dryer run a full cycle? ›

As for what made your dryer overheat and stop mid-cycle, the most common culprit is lint. If you are not in the habit of cleaning your lint filter, you should be. It should be emptied before drying every load. Letting it just build up means lint escapes into the exhaust hose and possibly the vent in your home.

Why do I have to run my dryer multiple times? ›

When a dryer is filled to the top it's considered overloaded. Overloading leaves no room for the dryer's hot air to properly circulate and limits tumbling. When this happens you'll find that your dryer takes two cycles to dry a large load.

Why does my dryer keep stopping when my clothes are still wet? ›

MOISTURE SENSOR

It's a convenient feature—but it also adds another potential cause for a dryer that turns off after a few minutes. If the sensor is defective or dirty, it may fail to detect moisture and inadvertently tell the dryer to shut off when the laundry is still wet.

What is a common problem for a clothes dryer that won't turn on? ›

A defective drive motor may be the culprit.

One of the more serious problems for why a dryer won't start could be a faulty drive motor. The drive motor is the mechanism that rotates the machine's drum. The motor can overheat from lint buildup, or sometimes small items can get inside and cause a blockage.

Why do mechanical timers stop working? ›

The gears in mechanical timers can get damaged. Sometimes bugs get in there and jam the gears, sometimes debris is the issue and other times the gears get old and may lose a tooth. If any of these issues occur your timer will not work properly.

What is a bypass timer? ›

Bypass Timers ("ON delay interval timer," "Normally closed delay on make") are designed to bypass a control or device during start-up. Typically used to bypass a low pressure switch during compressor heat pump start-up or to bypass an oil pressure switch upon start-up. Helps to eliminate nuisance lockouts.

Can you replace a switch with a timer? ›

Timer light switches are designed to replace conventional light switches—you just remove the standard switch and install the timer switch in the same electrical box. In this article, we discuss timers generally used for indoor applications. For information on outdoor varieties, see Energy-Efficient Outdoor Lighting.

How do I reset my dryer thermostat? ›

Many dryers are equipped with a reset button on the control panel. If the motor won't run, let the dryer cool for about ten minutes. Then push the reset button. If there are no problems with the motor, switches, or electrical system, this should restart the dryer.

How much does a dryer thermostat cost? ›

Replacing a dryer thermostat runs about $80 to $200. Expect to pay about $20 for the thermostat and about one to two hours of labor to install it. No heat in your dryer may be caused by other issues, like a bad timer, fuse, temperature switch, or heating coil.

How do I know if my dryer needs a new thermostat? ›

Measure the thermostat's ohms.

Place each of the meter's probes onto the wire terminals. You should receive a reading of 0. Resistance that is low, or near 0, means that the electrical flow is good. If the meter does not indicate 0, but reads infinity, your thermostat should be replaced.

Which dryers are being recalled? ›

The issue relates to more than 600 models of vented and condenser tumble dryers made by Hotpoint, Indesit, Creda, Swan and Proline - all part of the Whirlpool brand - between 2004 and 2015.
...
Is your dryer on the faulty list?
  • Hotpoint.
  • Indesit.
  • Creda.
  • Swan.
  • Proline.

How many dryers catch fire a year? ›

Dryer fire statistics and facts

While it may be hard to believe, dryer fires are a fairly common cause of home fires. In fact, according to the National Fire Protection Association, dryers and washing machines cause an average of 15,970 fires each year, with dryers causing 92% of them.

Why does my dryer keep shutting off after 5 minutes? ›

The most common cause of a dryer shutting off after a few minutes is a broken or faulty drive belt. The drive belt goes around the dryer drum, idler pulley, and the motor pulley and helps the dryer to rotate when operating. If it is defective, the dryer won't work correctly.

How do I know if my timer is bad on my Whirlpool dryer? ›

The dryer timer won't advance. If you set your dryer for 30 minutes, come back 30 minutes later, and find the gauge still pointing to the starting point, your timer (or timer motor) is likely broken.

Is it worth it to repair dryer? ›

In general, premium dryers are worth repairing for a longer period of time because the cost of a typical repair is a smaller proportion of the machine's value. In other words, a $172 repair on a $430 dryer makes little financial sense after the first few years.

How many years do dryers last? ›

A dryer should last 10-13 years. To extend the dryer's life, clean the lint trap after each use and make sure the outer vent is clear as well.

What does it mean when a dryer starts and then stops? ›

Dryer: Why does my dryer start then stop? If an electric dryer starts but then stops before the load is dry, a clogged exhaust vent may have caused the dryer to overheat and trip the thermal fuse. Regular preventive maintenance that includes clearing lint out of the exhaust system helps keep the dryer running.

How much does it cost to replace a dryer thermal fuse? ›

Other Parts
Faulty Dryer PartAverage Cost Range to Repair or Replace
Thermal fuse$80 – $130
Dryer thermostat$100 – $260
Coil$150 – $300
Vent$75 – $150
2 more rows

How much does a good dryer cost? ›

Dryer prices can run the gamut from $500 to $2,000 or more, but most sit in the $800 to $1,200 range.

Videos

1. Kenmore Dryer Repair – How to replace the Timer
(Fix.com)
2. How to Fix a Dryer Timer - Repairing a Whirlpool Timer that Won't Heat (W10186032) for Pennies
(Bens Appliances and Junk)
3. How To: Whirlpool/KitchenAid/Maytag Dryer Timer
(AppliancePartsPros)
4. Whirlpool Electric Dryer Timer Replacement #W10846428
(RepairClinic.com)
5. GE Dryer Timer Replacement WE04X24550
(RepairClinic.com)
6. Hotpoint Dryer Timer Replacement
(stevekonbass)
Top Articles
Latest Posts
Article information

Author: Madonna Wisozk

Last Updated: 01/26/2023

Views: 6512

Rating: 4.8 / 5 (48 voted)

Reviews: 87% of readers found this page helpful

Author information

Name: Madonna Wisozk

Birthday: 2001-02-23

Address: 656 Gerhold Summit, Sidneyberg, FL 78179-2512

Phone: +6742282696652

Job: Customer Banking Liaison

Hobby: Flower arranging, Yo-yoing, Tai chi, Rowing, Macrame, Urban exploration, Knife making

Introduction: My name is Madonna Wisozk, I am a attractive, healthy, thoughtful, faithful, open, vivacious, zany person who loves writing and wants to share my knowledge and understanding with you.